Pneumatic external sealing of medical devices in automated and semi-automated processes.
Medical Series Connectors
Typical Lead time is 1-2 weeks, but varies based on demand.
Medical Series Connectors
Typical Lead time is 1-2 weeks, but varies based on demand.
Unit of Measure
Specifications
|
Dimensions
|
Seal Material
|
ICON™ Intelligent Connection Technology
|
ICON™ Features
|
Programming Tool Features
|
Features
|
Additional Information
|
Note
Specifications
Brands |
N/A FasTest GTek Automation |
Connects To |
N/A Catheters Luers |
Pressure Rating |
N/A Vacuum to 34 barVacuum to 500 psi |
Pilot Pressure |
N/A 60 to 90 psi4.1 to 6.2 bar |
Operating Temperature |
N/A 0 to +200 ºF-17 to 93 ºC |
Operating Temperature for ICON™ |
N/A 32 to 100 ºF0 to 38 ºC |
Material |
N/A Anodized Aluminum |
Note for Seal Material |
N/A Additional seal material types available. |
Pneumatic |
N/A Pilot pressure applied to seals with no metal contact and uniform seal movement seals inside luer |
ICON™ Technology |
N/A Seal Life™ Sure Seal™ |
Dimensions
Dimension A |
N/A 2.05 in52.1 mm |
Dimension B |
N/A 1.49 in37.9 mm |
Dimension C |
N/A 1.10 in27.9 mm |
Thread Size (Dimension D) |
N/A 10-32 |
Thread Type (Dimension D) |
N/A Unified Fine (UNF) |
Minimum Insertion (Dimension M) |
N/A 0.58 in14.7 mm |
Pilot Port Thread Size (P) |
N/A 10-32 |
Pilot Port Thread Type (P) |
N/A Unified Fine (UNF) |
Outside Diameter (OD) Sealing Range |
N/A 0.100 to 0.510 in2.5 to 13.0 mm |
Termination Port Size (T) |
N/A 1/8 in |
Termination Port Type (T) |
N/A Female National Pipe Thread (FNPT) |
ICON™ Intelligent Connection Technology
ICON™ Intelligent Connection Technology |
N/A FasTest's ICON™ adds sensing capabilities to our mechanical Sealing Connection Tools. ICON™ Tools include instant LED visual feedback and data output to improve sealing connection accuracy, maximize production efficiency, and optimize maintenance. |
ICON™ Features
Sure Seal™ |
N/A Instant LED feedback verifies a good connection prior to starting a test. |
Seal Life™ |
N/A Alert when the main seal is at end of life and must be replaced. |
Programming Tool Features
Programming Tool Features |
N/A
|
