Manual lever actuated internal grip and seal connection tool for straight tubes/bores.
Typical Lead time is 1-2 weeks, but varies based on demand.
Typical Lead time is 1-2 weeks, but varies based on demand.
Unit of Measure
Specifications
Brands |
N/A FasTest GTek Automation |
Sealing Inside Diameter (ID)/Tube Inside Diameter (ID) |
N/A 1.000 to 1.375 in |
Pressure Rating |
N/A 750 psi |
Connects To |
N/A Straight |
Note for Pressure Rating |
N/A Pressure rating based on the test piece having a surface finish greater than 16 rms and a hardness of no more than 95 Rb to grip and seal at the rated pressure. A surface finish of 8 rms may be acceptable if the test piece has a hardness no greater than 40 Rb. |
Operating Temperature |
N/A -40 to +250 ºF-40 to +121 ºC |
Material of Construction |
N/A Acetal (Polyoxymethylene (POM)) Aluminum Stainless Steel Urethane Collet Retainer |
Termination Port Size (T) |
N/A 1/8 in |
Termination Port Type (T) |
N/A National Pipe Thread (NPT) |
Tube Size Tolerance (±) |
N/A 0.010 in0.25 mm |
Seal Material
Seal Material1 | N/A Neoprene® |
Note for Seal Material |
N/A Additional seal material types available. |
Additional Information
Additional Information |
N/A
|
- 1 Additional seal material types available, consult factory.