Item # JNL0-0375H, JNL Series Internal Connector, Seals 0.375" I.D., 1000 PSI On GTek Automation

Request Information

Manual lever actuated internal grip and seal connection tool for straight tubes/bores.

Typical Lead time is 1-2 weeks, but varies based on demand.

Unit of Measure

Brands	N/A FasTest GTek Automation
Sealing Inside Diameter (ID)/Tube Inside Diameter (ID)	N/A 0.375 in9.5 mm
Pressure Rating	N/A 10 mTorr (micron) to 1000 psi (68.9 bar)
Connects To	N/A Straight
Note for Pressure Rating	N/A Pressure rating based on the test piece having a surface finish greater than 16 rms and a hardness of no more than 95 Rb to grip and seal at the rated pressure. A surface finish of 8 rms may be acceptable if the test piece has a hardness no greater than 40 Rb.
Operating Temperature	N/A -40 to +250 ºF-40 to +121 ºC
Material of Construction	N/A Acetal (Polyoxymethylene (POM)) Aluminum Stainless Steel Urethane Collet Retainer
Termination Port Size (T)	N/A 1/8 in
Termination Port Type (T)	N/A National Pipe Thread (NPT)
Tube Size Tolerance (±)	N/A 0.010 in0.25 mm

Minimum Insertion (Dimension M)

N/A 0.53 in13.5 mm

Seal Material¹	N/A Neoprene®
Note for Seal Material	N/A Additional seal material types available.

N/A Simply flip the ergonomic handle for ease of use

N/A Fast Reliable Safe

N/A

Pressure assisted sealing and gripping with internal safety lock feature prevents accidental disconnection under pressure if handle is released
Instant connection for copper, steel, and aluminum tubes commonly used in refrigeration and other industrial applications
Stainless steel collets provide maximum grip with minimum distortion of the test piece
Quick and easy seal replacement to minimize down time, maintenance and tool inventory
Self aligning connector requires no operator adjustment

N/A JNL sizes available in 0.005 (0.13 mm) increments per customer request.

Body sold separately, select seal set for the base connector.